Download NEPS1000 Dual Voltage BrochureThe NEPS1000 DUAL VOLTAGE is the latest development for improving the effective and efficient use of dry gas purging for electronic, optical, high voltage, laser systems and equipment requiring gas drying.
High humidity and water vapour can have a deleterious impact on the use, operation and long-term reliability of instruments and systems.
Key Features & Benefits
- Fully Self Contained for Portable use
- Easy to Use Single Connection Purging
- Dewpoint and Pressure Readout
- Remote Dewpoint Sensing Option
- Portable and Robust
- User Programmable
- Automatic Purging Operation
- Dewpointstat Gas Control
- Dewpoint Display from +20°C to -80°C
- Maintainable Online
- NATO Approved
The Complete Purging System
The NEPS1000 DUAL VOLTAGE is designed to maximise the dry gas purging process for humidity removal. It has a host of capabilities and functionality for effective and efficient control during the purging operation.
NEPS1000 DUAL VOLTAGE is fully self-contained. Simply connect the equipment to be processed to the purge connection and the NEPS1000 DUAL VOLTAGE is ready to operate.
Economic Gas Use
One of the NEPS1000 DUAL VOLTAGE benefits is its use of the purge gas used for purging. By using a single pipe connection the purge gas is controlled and dispersed throughout the instrument or system being purged. During the depressurisation phase of purging the purge gas is isolated.
The NEPS1000 DUAL VOLTAGE has easy to use selectable programming which can be set to view process control values and display dewpoint measurements in ºC or ºF with pressure in Kpa or psi. Highly visible liquid displays provide constant information and readouts during the operation and use of the NEPS1000 DUAL VOLTAGE.
Equipment Leak Testing
The NEPS1000 DUAL VOLTAGE comes with a selection of four in built leak testing capabilities to verify the sealing standard of the equipment to be purged. Pressure testing can be conducted at pressures from 10.3 Kpa (1.5 psi) to 34.4 Kpa (5.0 psi). Pressure leakrate display resolution is 0.01 psi.
Gas Quality Testing
The dryness of the gas is important to the effectiveness of the purging operation and the NEPS1000 DUAL VOLTAGE dewpoint monitor can be used to check the dryness of the gas prior to commencing the purging operation.
The NEPS1000 DUAL VOLTAGE can be operated from global country voltages and frequencies ranging from 100 to 230 VAC at 50-60 Hz. It also operates from a 24 VDC supply.
Single Connection Purging
Traditional conditioning with dry nitrogen, gas or air depends on the flow of gas from an entry connection to an outlet port. In this mode the gas will follow the simplest and easiest path to the outlet connection. This can often lead to “pockets” of unconditioned gas.
Using NEPS1000 Dual voltage the mode of operation changes to a more efficient single connection purging process which also uses a choice of three selectable pressure cycles to ensure the dry gas influences all the space volume within an equipment.
During the purge process the NEPS1000 Dual voltage monitors the pressure. When the pre-selected setting is achieved the supply gas is isolated and an internal control valve allows the gas to flow to the exhaust port where the dewpoint of the mixed air/gas is measured. The purging process then continues until the desired dewpoint protection has been achieved.
|Selectable Pressure Ranges||10.3 Kpa (1.5 psi)
17.2 Kpa (2.5 psi)
34.4 Kpa (5.0 psi)
|Display Range Pressure||0 to 34.4 Kpa (0-5.0 psi)|
|Display Range Dewpoint||(Selectable)
+20ºC to –80ºC dewpoint
+68ºF to –94ºF dewpoint
|Accuracy||+/- 2ºC dewpoint|
|Data Output Pressure||0 – 5 Volts|
|Data Output Dewpoint||0 – 5 Volts|
|Power 1||100-230 volt 50-60hz|
|Power Consumption||3 amps|
|Power 2||24 VDC|
|Power Consumption||3 amps|
|Dimensions||490W x 425D x 190H (closed)|
|Ingress Protection||IP54 (Closed Case)|
|Operating Temp||-10ºC to +50ºC|
|Storage Temp||-50ºC to + 65ºC|
|Flowrate (typical)||20 litres per minute|
|Optional extras||See NEPS Accessories|